Smart Roofing PTY LTD Process
The process for a tile to Colorbond re-roofing project are outlined below;
- Erect perimeter scaffolding. It is a WorkSafe requirement that all homes over 2 meters in height have perimeter fall protection erected. Failure to do so can nullify the companies insurances.
- Strip and dispose of all old roof tiles. The old tiles are stripped from the roof and placed into a bin provided for this purpose. The bin is then removed and the work site left free of debris.
- Install metal battens. Metal battens are required as the tile battens are too thin and prone to splitting when the Colorbond roof is screwed into them. Our steel battens are installed at 900 mm spacings and, for extra support, along either side of all ridges, hips and valleys.
- Install 55 mm roof insulation blanket. Colorbond steel roofing is low in mass and, therefore, cools down much quicker than tiles. The installation of an insulation blanket can make a huge further improvement to thermal capabilities and also helps to eliminate noise from rain and hail. A sarking or sisalation product can also be used in place of the blanket but is a much more inferior product.
- Install new Colorbond roofing sheets. Custom orb, also known as corrugated Colorbond is the more popular profile for this type of application, but other profiles are available on request.
- Install new ridge capping and valley irons. The preferred capping style is roll top ridge. This has a piping style finish that suits the curve of custom orb, but other styles are available also.
- Install Deck-Tite flashing kits to penetrations. All pipes in the roof need these rubber seal flashings around them to prevent water ingress into the roof cavity.
- Clean job site thoroughly on completion. Off cuts of roofing and screws and rivets need to be removed to prevent injury or property damage. We employ the use of powerful magnets mounted on a hand-propelled two wheeled cart that we pass back and forth over the job site to ensure no mess is left behind.
Colour is also something that needs to be considered. Dark colours are popular but will also increase the temperature in the roof cavity. We also can provide solar powered heat extractors to mitigate this extra heat. These advanced units are automatically controlled with a thermostat that activates the solar powered motor when the roof cavity exceeds 26 degrees Celsius. These units are much better than traditional whirly birds as they are much more powerful and do not let heat out in winter.
The decision to re-roof your home is a financially sound one as this type of repair will inevitably increase the value of your home making it an investment rather than an expense. And because Colorbond steel is so popular among prospective buyers it generally means that you will have more potential purchasers further assisting in ensuring you get the price that you want.
Smart Roofing PTY LTD
We are available 7 days a week for an on-site inspection and our quotations are free of cost and without obligation. If you would like to talk to an expert about Smart Roofing PTY LTD, get in touch with us via Contact, or call us on 0499840116